For use by commercial applicators for use in, on and around

buildings and structures for the control of listed pests, including

on lawns, ornamental trees and shrubs around residential,

institutional, public, commercial, agricultural and industrial

buildings; and parks, recreational areas and athletic fields.

Active Ingredient:

Lambda-cyhalothrin1

3-(2-chloro-3,3,3-trifluoro-1-propenyl)-2,2-

dimethylcyclopropanecarboxylate . . . . . . . . . . . . . . . . . . . . 9.7%

Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.3%

Total: 100.0%

1Synthetic pyrethroid, capsule suspension (microencapsulated)

Si usted no entiende la etiqueta, busque a alguien para que se la

explique a usted en detalle. (If you do not understand the label,

find someone to explain it to you in detail.)

EPA Reg. No. 100-1066

EPA Est. 61282-WI-1

Product of Belgium

SCP 1066A-L1D 0904

1 quart

Net Contents

15-20 minutes.

treatment advice.

water for 15-20 minutes.

minutes, then continue rinsing eye.

treatment advice.

for treatment advice.

the poison control center or doctor.

person.

ambulance, then give artificial respiration,

preferably by mouth-to-mouth, if possible.

treatment advice.

Have the product container or label with you when calling a poison

control center or doctor, or going for treatment.

For 24-Hour Medical Emergency Assistance (Human or Animal) Or

Chemical Emergency Assistance (Spill, Leak, Fire or Accident)

Call

Harmful if absorbed through skin. Prolonged or frequently repeated

skin contact may cause allergic skin reactions in some

individuals. Avoid contact with skin, eyes, or clothing. Avoid

breathing spray mist or vapor. Wash thoroughly with soap and

water after handling. Remove contaminated clothing and wash

before reuse.

This product is extremely toxic to fish. Do not contaminate water

when cleaning equipment or disposing of equipment washwater.

Do not apply directly to water, or to areas where surface water

is present, or to intertidal areas below the mean high water

mark. Drift and runoff from treated areas may be hazardous

to aquatic organisms in neighboring areas. Apply this product

only as specified on this label. When making applications, care

should be used to avoid household pets, particularly fish and

reptile pets.

This product is highly toxic to bees exposed to direct treatment or

residues on blooming crops or weeds. Do not apply this product

or allow it to drift to blooming crops or weeds if bees are visiting

the treatment area.

Do not use this product in or on electrical equipment due to the

possibility of shock hazard.

of Sale and Limitation of Warranty and Liability before buying

or using this product. If the terms are not acceptable, return

the product at once, unopened, and the purchase price will be

refunded.

SYNGENTA warrants that this product conforms to the chemical

description on the label and is reasonably fit for the purposes

stated in the Directions for Use, when used in accordance with

directions under normal use conditions. This warranty does not

extend to the use of this product contrary to label instructions,

or under abnormal conditions or under conditions not reasonably

foreseeable to or beyond the control of Seller or SYNGENTA, and

Buyer and User assume the risk of any such use. SYNGENTA

MAKES NO WARRANTIES OF MERCHANTABILITY OR OF

FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER

EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED

ABOVE.

event shall SYNGENTA or Seller be liable for any incidental,

consequential or special damages resulting from the use

SYNGENTA and Seller offer this product, and Buyer and User accept

it, subject to the foregoing Conditions of Sale and Limitation

of Warranty and of Liability, which may not be modified except

by written agreement signed by a duly authorized representative

of SYNGENTA.

It is a violation of Federal law to use this product in a manner

inconsistent with its labeling.

other commercial use, or for commercial seed production, or

for research purposes. For use on plants intended for aesthetic

purposes or climatic modification and being grown in interior

plantscapes, ornamental gardens or parks, or on lawns or

grounds.

This product is restricted for use in the state of New York, where

it is only for sale to, use, and storage by Certified Applicators.

Do not contaminate water, food, or feed by storage or disposal.

Open dumping is prohibited. Do not reuse empty container.

Keep container closed when not in use. Do not store near food

or feed. Shake well before use. Protect from freezing. In case of

spill or leak on floor or paved surfaces, soak up with sand, earth,

or synthetic absorbent. Remove to chemical waste storage area

until proper disposal can be made.

Pesticide wastes are toxic. Improper disposal of excess pesticide,

spray mixture, or rinsate is a violation of Federal law. If

these wastes cannot be disposed of by use according to label instructions,

contact your State Pesticide or Environmental Control

Agency, or the Hazardous Waste representative of the nearest

EPA Regional Office for guidance.

Triple rinse (or equivalent). Completely empty container into

application equipment, then offer for recycling or reconditioning,

or puncture and dispose of empty container in a sanitary landfill,

or by other procedures approved by state and local authorities.

For use as a general surface, crack and crevice, or spot treatment

in, on, and around buildings and structures and their immediate

surroundings, and on modes of transport. Permitted

areas of use include, but are not limited to, aircraft (cargo and

other non-cabin areas only), apartment buildings, boiler rooms,

buses, closets, correctional facilities, decks, entries, factories,

fencing, floor drains (that lead to sewers), food granaries, food

grain mills, food manufacturing, processing and serving establishments;

furniture, garages, garbage rooms, greenhouses

(non-commercial), hospitals, hotels and motels, houses, industrial

buildings, laboratories, livestock/poultry housing, landscape

vegetation, locker rooms, machine rooms, mausoleums, mobile

homes, mop closets, mulch, nursing homes, offices, patios, pet

kennels, porches, railcars, restaurants, storage rooms, schools,

sewers (dry), stores, trailers, trees, trucks, utility passages, vessels,

vestibules, warehouses, wineries and yards.

For indoor applications, retreat at 21 day intervals or as necessary

to maintain control.

Demand CS Insecticide is intended for dilution with water for application

using hand-held or power-operated application equipment

as a coarse spray for crack and crevice or spot and general

surface treatments. Application equipment that delivers low

volume treatments, such as the Micro-Injector® or Actisol® applicator,

may also be used to make crack and crevice or spot and

general surface treatments. Fill applicator tank with the desired

volume of water and add Demand CS Insecticide. Close and

shake before use in order to ensure proper mixing. Shake or

reagitate applicator tank before use if application is interrupted.

Mix only amount of treatment volume as required. A general

surface treatment of Demand CS Insecticide may be applied

by using a paintbrush or other porous applicator attached to a

handle.

Demand CS Insecticide may be tank mixed with other currently

registered pesticides unless expressly prohibited by the product

label. A small volume mixing test with the other products is

recommended to ensure compatibility. If mixed with sanitizers,

Demand CS Insecticide should be added to the tank first. If

other chemicals are added to the applicator tank, Demand CS

Insecticide should be added last. If mixed with EC formulations,

use within 24 hrs. Fill tank to desired volume and continue to

agitate while making applications.

Demand CS Insecticide may be tank mixed with an Insect Growth

Regulator (IGR) such as Archer® Insect Growth Regulator.

Demand CS Insecticide may be converted to a foam and the

foam used to treat structural voids to control or prevent pests

including ants, bees, termites (above ground only), wasps, or

other arthropods harboring in walls, under slabs, or in other void

areas.

Ants

Bedbugs (adult)

Bees

Beetles

Boxelder Bugs

Carpenter Bees

Carpet Beetles

Centipedes

Cigarette Beetles

Clover Mites

Cockroaches1

Confused Flour Beetles

Crickets

Earwigs

Firebrats

Fleas2

Flies

0.015-0.03% 0.015%:

0.2 fl. oz. (6 mL)/

gal. of water

0.03%:

0.4 fl. oz.

(12 mL)/gal.

of water

Lesser Grain Borers

Millipedes

Mosquitoes

Red Flour Beetles

Rice Weevils

Saw-toothed Grain

Beetles

Silverfish

Sowbugs

Spiders

Termites (above ground

only)

Ticks

Wasps

Cockroaches1

Crickets6

Litter Beetles3 (such as

Darkling, Hide, and

Carrion)

Mosquitoes4

Pillbugs

Scorpions

Spiders6

Spider Mites

(Twospotted, Spruce)

Ticks6

0.06% 0.8 fl. oz.

(24 mL)/gal.

of water

*Not approved for use in California at the high rate.

1 For cockroaches, the recommended rate for maintenance treatments is

0.015% and for clean-out treatments is 0.03%. For control of SEVERE

infestations, use 0.06% rate.

2 For outdoor use only and use 0.03% rate.

3 For control of LIGHT beetle infestations, use 0.03% rate.

4 For residual control, use 0.06% rate.

5 Rates for flies may be increased to 0.06% when environmental conditions

are severe and/or populations are high.

6 For clean-out/severe infestations, use 0.06% rate.

Apply to any trails around doors and windows and other places

where ants may be found. For best results, locate and treat

nests. Where ants are trailing inside, apply as a residual surface

treatment to active areas such as baseboards, corners, around

pipes, in and behind cabinets, behind and under refrigerators,

sinks, furnaces and stoves, cracks and crevices. When combining

baits and residual surface insecticides, apply surface insecticides

in cracks and crevices, along baseboards, and infested

surfaces and outside barrier treatments. Treatment of perimeter

landscaping can reduce honeydew-producing insects and limit

this ant food source. Use baits in other areas that are untreated

Apply as a coarse, low pressure spray to areas where these

pests hide, such as baseboards, corners, storage areas, closets,

around water pipes, doors and windows, attics and eaves,

cabinets, behind and under refrigerators, furniture, sinks, furnaces

and stoves, the underside of shelves, drawers and similar

areas. Pay particular attention to cracks and crevices; also see

Recommend cleaning of floors and surfaces by vacuuming. Apply

as a coarse, low-pressure spray to harborage areas including

crevices, baseboards, loose plaster, behind bed frames and

headboards, beneath beds and furniture, and to bedsprings and

bed frames. Do not apply to furniture surfaces or mattresses

where people will be laying or sitting. Infested bedding should

not be treated, but should be removed, placed in sealed plastic

bags, and taken for laundering and drying at high temperatures.

Apply directly to walls, ceilings, window screens, and other resting

areas as a residual surface treatment. May be used inside

residential buildings as well as in and around carports, garages,

when treating nests of stinging insects as Demand CS Insecticide

does not provide instant knockdown. Protective equipment

for the applicator may be required. For best results, treat bee,

wasp and hornet nests late in the day when most insects will be

present. Allow 2-3 days for colony to die and retreat if necessary.

For mosquito control, apply as a general structural perimeter

spray to landscape plantings, turf, and building foundations to

control mosquitoes. Yards or other frequented areas enclosed

by landscaping can benefit from the creation of a mosquito barrier

to reduce invading mosquitoes by the treatment of perimeter

vegetation. For best results, apply Demand CS Insecticide at recommended

rates in 2-5 gals. of water per 1,000 sq. ft. Higher

volumes applied result in better coverage and, as a rule, will

improve control. Application to vegetation away from structures

may require additional certification, e.g. in turf or ornamental categories.

Consult your state regulatory agency for requirements.

Apply coarse spray to thoroughly wet wood surfaces where bees

have been previously active or to provide protection against further

damage. Apply early in the spring to prevent bees from

invading wood. When bees have infested wood, surface applications

can help control embedded larvae and bees that emerge

from the wood. Applications can be made on a monthly basis to

maintain protection of treated areas.

Apply to cupboards, shelving, and storage areas. Remove all

utensils, uncovered foodstuffs (or any having original package

opened), and shelf paper before making application. Allow

treated surfaces to dry and cover shelves with clean paper

before replacing any utensils, foodstuff, or other items. Any foodstuff

accidentally contaminated with treatment solution should be

destroyed.

Apply around doors and windows and other places where these

pests may be found or where they may enter premises. Treat

baseboards, storage areas, and other locations. Apply barrier

treatments to prevent infestation as described below; also see

To control nuisance fleas and ticks (e.g. dog ticks) apply to

kennels, yards, runs, and other areas where pets may frequent.

For best coverage to control ticks, apply using a coarse fan spray

to vegetation brush, branches, rock walls, and other areas near

habitation where ticks may harbor or frequent. Treat entire area

rather than making spot treatments, and retreat as necessary to

maintain control. Do not apply to pasture or cropland, and do

not allow animals and people access to treated areas until the

deposit has dried. Applications can be made on a monthly basis,

beginning in the spring and can continue until frost to control both

larvae and adult ticks. Also, treat pest with a product registered

Apply in late summer or early fall before flies are observed alighting

on surfaces. Apply thoroughly on siding, under eaves, and

around windows and doors, paying particular attention to southfacing

surfaces. Apply just enough dilution to adequately cover

the area without excessive dripping or runoff. Volume can vary

depending on the surface type treated. Heavy precipitation prior

to frost may require retreatments to maintain protection. In winter

and spring when flies become active and are emerging, interior

crack and crevice and void treatments can help reduce the infestation,

along with ULV or general surface application in infested

attics or unoccupied lofts.

To control adult litter beetles, apply Demand CS Insecticide to

walls and floors at cleanout, before reintroduction of animals.

This will suppress beetles that escaped earlier treatment and

will help delay onset of future infestations. Pay attention to areas

where beetles frequently occur, such as walls, supports,

cages, stalls, and around feeders. To help control flies, apply

a directed application to horizontal surfaces and overhead areas

and allow to dry before reintroduction of animals; also see

other than private residences in which exposed food is held,

processed, prepared, or served) including, but not limited to, areas

for receiving, storage, packing (canning, bottling, wrapping,

boxing), preparing foods, edible waste storage and enclosed processing

systems (mills, dairies, edible oils, syrups), and serving

areas.

Use as a crack and crevice or spot treatment in and around both

food and nonfood areas. Apply in small amounts directly into

cracks and crevices, using equipment capable of delivering a

pin stream of insecticide, in points between different elements of

construction, between equipment and floor, openings leading to

voids and hollow spaces in walls, equipment and bases. Food

contact surfaces and equipment should be cleaned with an effective

cleaning compound and rinsed with potable water before

using.

Limit individual spot treatments to an area no larger than 20% of

the treated surface. Individual spot treatments should not exceed

2 sq. ft. Take extreme care that the product is not introduced

into the air. Avoid contamination of food and food processing

surfaces.

Apply as a crack and crevice or spot treatment to selective surfaces

such as baseboards, under elements of construction, and

into cracks and crevices. Avoid treating surfaces likely to be

contacted by food. (Do not apply when facility is in operation or

foods are exposed.) Food must be covered or removed in area

being treated. Do not apply directly to food or allow applications

to contaminate food.

Application of this product in the Food Areas and/or Food Serving

Areas of Food Handling Establishments other than as a spot

and/or crack and crevice treatment is not permitted. Use of application

equipment such as the Micro-Injector or Actisol applicator

in food areas should be limited to crack and crevice treatment

only.

Apply as a general surface (including directed sprays) and/or

crack and crevice treatment. Control is enhanced when interior

and exterior perimeter applications are made in and around the

livestock, poultry, and pet housing structures. Normal cleaning

practices of the structure also must be followed along with applications

of Demand CS Insecticide to effectively control the

crawling and flying insect pests listed in the table.

For unoccupied areas of livestock barns or housing structures,

apply to floors, vertical, and overhead surfaces where crawling

or flying insect pests are or may be present. Feeders, waterers,

and feed carts should be covered before application to prevent

contamination. Do not apply to milk rooms or feed rooms. Pay attention

to animal areas including stanchions, pipes, windows and

doors, and areas where insect pests hide or congregate. Exterior

applications to south facing walls and foundation perimeters

can help prevent interior infestations of flying and crawling insect

pests.

For poultry houses, apply to floor area (birds grown on litter)

or to walls, posts, and cage framing (birds grown in cages).

Application should also be made into cracks and crevices around

insulation. Reapply after each growout or sanitization procedure.

Indoor control can be enhanced by making perimeter treatments

around the outside of building foundations to prevent immigrating

adult beetles. Apply in a uniform band 1-3 ft. up and 2-6 ft. out

from foundation. Maintaining a year-round treatment program will

prevent background populations from reaching problem levels.

Do not make interior applications of Demand CS Insecticide in

areas of facility where animals other than cattle or calves are

present. Allow treated surfaces to completely dry before restocking

the facility.

watering equipment.

around livestock, poultry, or pet housing when making applications.

For control of ants, bees, centipedes, cockroaches, crickets,

fleas, flies, millipedes, mosquitoes, scorpions, sowbugs, pillbugs,

spiders, termites (above ground only), ticks, wasps, and other

similar perimeter arthropod pests. Apply with either hand or

power application equipment as a residual treatment to ornamental

plants next to foundations of buildings and to surfaces

of buildings, porches, screens, window frames, eaves, patios,

garages, refuse dumps, and other similar areas where these insect

pests are active. For termites, this type of application is not

intended as a substitute for soil treatment labeled termiticides

or mechanical alteration to control subterranean termites, or fumigation

for extensive infestation of drywood termites or other

wood-infesting insects. The purpose of such applications of Demand

CS Insecticide for termites is to kill workers or winged

reproductive forms which may be present in treated channels at

the time of treatment. Such applications are not a substitute for

mechanical alteration, soil treatment or foundation treatment, but

are merely a supplement. This product is not recommended as

sole protection against termites. For active termite infestations,

get a professional inspection.

Applying a continual band of insecticide around a building foundation

and around windows, doors, service line entrances, eaves,

vents, and other areas can greatly reduce the potential for entry

by crawling pests. To facilitate application, remove debris

and leaf litter from next to the foundation, cut back vegetation

and branches that touch the foundation, and move or rake back

rocks, deep mulch, or other potential pest harborage next to the

foundation. Apply the band up to 10 ft. wide around the structure

(or according to state regulations governing commercial pest

control) and upwards along the foundation to 3 ft. and around

windows, doors, and roof overhangs. Apply as a coarse spray

to thoroughly and uniformly wet the foundation and/or band area

so that the insecticide will reach the soil or thatch level where

pests may be active.

Amount of concentrate is dependent upon pest species (see

pest table and comments), infestation levels, and service interval

desired.

0.2 fl. oz. (6 mL) 1-5 gals. 800-1600 sq. ft.

0.4 fl. oz. (12 mL) 1-5 gals. 800-1600 sq. ft.

0.8 fl. oz. (24 mL) 1-5 gals. 800-1600 sq. ft.

1Application volume may be greater than 5 gals./800-1600 sq. ft. if required

under heavy vegetative or landscaping materials in order to obtain

desired coverage.

1 gal./

1000 sq. ft.

0.2 fl. oz.

(6 mL)

0.4 fl. oz.

(12 mL)

0.8 fl. oz.

(24 mL)

1 fl. oz.

(30 mL)

2 fl. oz.

(60 mL)

4 fl. oz.

(120 mL)

2 fl. oz.

(60 mL)

4 fl. oz.

(120 mL)

8 fl. oz.

(240 mL)

10 fl. oz.

(30 mL)

20 fl. oz.

(600 mL)

40 fl. oz.

(1200 mL)

2 gal./

1000 sq. ft.

0.2 fl. oz.

(6 mL)

0.4 fl. oz.

(12 mL)

0.8 fl. oz.

(24 mL)

0.5 fl. oz.

(15 mL)

1 fl. oz.

(30 mL)

2 fl. oz.

(60 mL)

1 fl. oz.

(30 mL)

2 fl. oz.

(60 mL)

4 fl. oz.

(120 mL)

5 fl. oz.

(150 mL)

10 fl. oz.

(300 mL)

20 fl. oz.

(600 mL)

5 gal./

1000 sq. ft.

0.2 fl. oz.

(6 mL)

0.4 fl. oz.

(12 mL)

0.8 fl. oz.

(24 mL)

0.2 fl. oz.

(6 mL)

0.4 fl. oz.

(12 mL)

0.8 fl. oz.

(24 mL)

0.4 fl. oz.

(12 mL)

0.8 fl. oz.

(24 mL)

1.6 fl. oz.

(48 mL)

2 fl. oz.

(60 mL)

4 fl. oz.

(120 mL)

8 fl. oz.

(240 mL)

Example calculation: to apply the mid-rate of Demand CS Insecticide

at a volume of 5 gal./1000 sq. ft., mix 4 oz. of concentrate

in 50 gallons of water.

The percent active ingredient in the finished Demand CS Insecticide

dilution can be calculated with the following formula:

mL needed to add times 9.7% active in concentrate, divided by

gal. finished dilution times 3785 mL/gal. = % active in dilution.

(Example: 4 oz. in 50 gal. is 120 mL, times 9.7 equals 1164,

and 50 gal. times 3785 is 189250. Dividing 1164 by 189250

equals 0.006% active in the tank dilution).

in conduits, motor housings, junction boxes, switch boxes, or

other electrical equipment because of possible shock hazard. For

best results, thoroughly wash out sprayer and screen with water

and detergent before using Demand CS Insecticide. Demand

CS Insecticide has not stained or caused damage to painted

or varnished surfaces, plastics, fabrics, or other surfaces where

water applied alone causes no damage. However, treat a small

area and allow to dry to determine whether staining will occur.

Do not use this product with oil.

Do not apply this product in any room being used as living, eating,

sleeping, or recovery area by patients, the elderly, or infirm when

they are in the room.

Do not apply to classrooms when in use.

Do not apply to institutions (including libraries, sports facilities,

etc.,) in the immediate area when occupants are present.

Do not apply this product to edible growing crops or stored raw

agricultural commodities used for food or feed.

Do not allow applications to contact water inhabited by fish, such

as in aquariums and ornamental fish ponds that are located

in/around structures being treated.

Demand CS Insecticide may be used for applications to maintain

indoor or outdoor areas where turf and ornamentals are

grown such as residential landscaped areas and non-residential

landscapes around institutional, public, commercial and industrial

buildings, parks, recreational areas, and athletic fields. Application

rates for turf and ornamental applications of Demand CS

Insecticide are lower than structural pest control rates, reflecting

that treatment intervals are generally more frequent.

Applicators must ensure that they are certified in the necessary

pesticide certification categories to allow application of Demand

CS Insecticide away from structures, such as to turf and ornamental

plantings. Structural pest control certification categories

may limit the distance away from structures for pesticide application.

Consult your state extension office or pesticide regulatory

officials for further information.

when pollinating insects are not present, such as early morning

or late evening.

Do not apply this product through any type of irrigation system.

Do not apply this product to edible crops.

Do not apply this product by aerial application.

Use of this pesticide adjacent to water may affect aquatic organisms.

To protect these organisms, do not apply this pesticide

within 25 ft. of lakes, reservoirs, rivers, permanent streams,

marshes or natural ponds, estuaries, and commercial fish farm

ponds.

Do not make outdoor broadcast applications to turf and ornamentals

when wind speed is 15 mph or greater.

In the state of New York, do not apply within 100 ft. of coastal

marshes or streams that drain into coastal marshes.

Demand CS Insecticide is to be mixed with water and may be

used in all types of standard application equipment. Fill applicator

tank with the desired volume of water and add Demand CS

Insecticide. It is suggested that the water be 5-7 pH. Adjust water

pH with a buffering agent if necessary. Slowly add Demand

CS Insecticide to applicator tank water with maximum agitation.

Close and shake or reagitate applicator tank before use if application

is interrupted. Make up only amount of treatment volume

as required.

Demand CS Insecticide may be tank mixed with other currently

registered pesticides unless expressly prohibited by the product

label. Adjuvants such as spreader stickers, wetting agents, and

penetrants may also be added. A small volume mixing test with

the other products is recommended to ensure compatibility. If

other chemicals are added to the applicator tank, Demand CS

Insecticide should be added last. Fill tank to desired volume and

continue to agitate while making applications. If mixed with EC

formulations, use within 24 hours.

Observe all restrictions and precautions which appear on the

labels of these products.

in Residential Landscaped Areas and

Landscaped Areas Around Institutional, Public,

Commercial and Industrial Buildings, Parks,

Recreational Areas, and Athletic Fields

(Including Trees, Shrubs, Flowers, Evergreens,

Foliage Plants and Groundcovers)

Ants (Including Imported fire ants)

Armyworms

Azalea caterpillars

Aphids

Bagworms

Black vine weevils (adult)

Boxelder bugs

Budworms

California oakworms

Cankerworms

Cockroaches

Crickets

Cutworms

Eastern tent caterpillars

Elm leaf beetles

European sawflies

Fall webworms

Flea beetles

Forest tent caterpillars

Gypsy moth larvae

Japanese beetles (adults)

June beetles (adults)

Lace bugs

Leaf-feeding caterpillars

Leafhoppers

Leafminers (adults)

Leaf rollers

Leaf skeletonizers

Midges

Mosquitoes

Oleander moth larvae

Pillbugs

Pine sawflies

Pine shoot beetles

Pinetip moths

Plant bugs

Root weevils

Sawflies

Scale insects (crawlers)

Spiders

Spittlebugs

Striped beetles

Striped oakworms

Thrips

Tip moths

Tussock moth larvae

Wasps

1.5-5 fl. oz./100 gals.

or

44-148 mL/100 gals.

Broadmites

Brown softscales

California redscales (crawlers)

Clover mites

Mealybugs

Pineneedlescales (crawlers)

Spider mites

Whiteflies

3-5 fl. oz./100 gals.

or

88-148 mL/100 gals.

Example calculation: to prepare a mid-rate dilution of Demand

CS Insecticide, mix 3 oz. (88 mL) of concentrate in 100 gals.

Application to ornamentals should be started prior to the establishment

of high insect pest populations. Make reapplications as

necessary to keep pest populations under control, using higher

rates as pest pressure increases.

Apply at 7-day intervals if retreatment is necessary. More frequent

treatments should be limited to spot treatments. Recognize

that as plants grow, new foliage will be unprotected until treated.

Do not apply more than 0.36 lbs. of the a.i. (52.4 fl. oz. of

concentrate)/A per year.

Good spray coverage is necessary to provide the most effective

level of control. Addition of a spreader-sticker at recommended

rates may enhance the control of insects on certain species of

ornamentals having waxy, hard to wet foliage.

For spot treatments use 0.5 fl. oz. Demand CS Insecticide per

1-21/2 gals. of water.

Consult your state university or local Cooperative Extension Service

office for specific pest control application timing in your area.

range of ornamental plants under various environmental conditions,

and no phytotoxicity has been observed, certain cultivars

may be sensitive to the final spray solution.

It is advised to prespray a selection of ornamental plants and observe

them for 7-10 days prior to treating large areas if local use

experience is unavailable. This is especially advisable if Demand

CS Insecticide is being mixed with another product or ingredient

spray, including trunks, stems, twigs, and foliage for control of

scale insects (crawler stage).

begin to hatch. Spray directly on the larvae. Application is the

most effective when the larvae are young.

1.5 oz.1 0.4 oz. 0.8 oz. 1.5 oz. 3.0 oz. 4.5 oz.

3.0 oz.2 0.8 oz. 1.5 oz. 3.0 oz. 6.0 oz. 9.0 oz.

5.0 oz.3 1.3 oz. 2.5 oz. 5.0 oz. 10.0 oz. 15.0 oz.

1Equivalent to 3.5 mL/1000 sq. ft. (or 5 oz./A) when applied at 8 gal./1000

sq. ft.

2Equivalent to 7 mL/1000 sq. ft. (or 10 oz./A) when applied at 8 gal./1000

sq. ft.

3Equivalent to 9.5 mL/1000 sq. ft. (or 14 oz./A) when applied at 8 gal./1000

sq. ft.

Around Residential, Institutional, Public,

Commercial and Industrial Buildings, Parks,

Recreational Areas and Athletic Fields

Ants (Including Imported fire ants)

Armyworms

Centipedes

Crickets

Cutworms

Earwigs

Fleas (adult)

Grasshoppers

Japanese beetles (adult)

Millipedes

Mites

Mosquitoes (adult)

Pillbugs

Sod webworms

Sow bugs

Ticks (including species which transmit Lyme

disease)

3.4-7 mL/1000 sq. ft.

or

5-10 fl. oz./A

Bluegrass billbugs (adult)

Black turfgrass ataenius (adult)

Chiggers

Fleas (adult)

Grubs (suppression)

Hyperodes weevils (adult)

Mole crickets (nymphs and young adults)

7 mL/1000 sq. ft.

or

10 fl. oz./A

Mole Crickets1 (mature adults)

Chinch Bugs1

14 mL/1000 sq. ft.

or

20 fl. oz./A

1Not for use on mature adult mole crickets and chinch bugs in New York State

Example calculation: to treat listed turf pests at the mid-rate for

Demand CS Insecticide of 7 mL/1000 sq. ft., determine gals.

dilution/1000 sq. ft. needed to cover turf. At 5 gal./1000 sq. ft.,

would be equivalent to 70 mL or 2.5 oz. in 50 gals. water.

Application to turf should be started prior to the establishment of

high insect pest populations and significant turf damage. Make

reapplications as necessary to keep pest populations under control,

using higher rates as pest pressure increases.

Apply at 7-day intervals if retreatment is necessary. More frequent

treatments should be limited to spot treatments.

Do not apply more than 0.36 lbs. of a.i. (52.4 fl. oz. of concentrate)/

A per year.

For spot treatments, use 0.5 fl. oz. of Demand CS Insecticide

per 1-2.5 gals. of water.

Do not apply when turfgrass is waterlogged or when soils are

saturated with water (i.e. will not accept irrigation).

For best results, apply Demand CS Insecticide at recommended

rates in 2-5 gals. of water per 1,000 sq. ft. The use of a spreadersticker

may be useful if high rainfall amounts are forecast, otherwise

the addition of adjuvants is not necessary under normal

conditions for surface insect control in turf. Delay watering or

mowing for 12-24 hours for optimum control of surface-feeding

insect pests.

For best results, apply Demand CS Insecticide at recommended

rates in 2-10 gals. of water per 1,000 sq. ft. The use of a nonionic

wetting agent, penetrant or similar adjuvant is recommended at

label rates. Lightly irrigate after application with up to 1/2 inch of

water to move the Demand CS Insecticide into the thatch layer.

If irrigation is not available, then use high water application rates

for optimum results.

For best results, apply Demand CS Insecticide at recommended

rates in 4-10 gals. of water per 1,000 sq. ft. The use of a nonionic

wetting agent, penetrant or similar adjuvant is strongly recommended

following label rates. Use the highest water application

rates possible with your sprayer. Apply Demand CS Insecticide

to turf wet with dew, rain or irrigation. Water-in immediately after

application with 1/4-1/2 inch of water for optimum results.

Treat individual mounds with a drench application using a watering

can. Use 0.5 fl. oz. of Demand CS Insecticide per 2.5 gals.

of water. Thoroughly soak each mound and a 3 ft. diameter

circle around each mound. Gently apply the mixture to avoid

disturbing the mound. Disturbing the mound may cause the ants

to migrate and reduce the effectiveness of the treatment. For

best results, apply in early morning or late evening hours. Applications

can be made on a monthly basis to maintain protection

of treated areas.

Apply as a general spray around landscape plantings, turf, and

building foundations to control mosquitoes. Yards or other frequented

areas enclosed by landscaping can benefit from the

creation of a mosquito barrier to reduce invading mosquitoes by

the treatment of perimeter vegetation. For best results, apply

Demand CS Insecticide at recommended rates in 2-5 gals. of

water per 1,000 sq. ft. Higher volumes applied result in better

coverage and, as a rule, will improve control.

5 oz./A 5.7 oz. 2.9 oz. 1.9 oz. 1.4 oz. 1.2 oz.

10 oz./A 11.5 oz. 5.7 oz. 3.8 oz. 2.9 oz. 2.3 oz.

20 oz./A 23.0 oz. 11.5 oz. 7.7 oz. 5.7 oz. 4.6 oz.

Conversion Rate: 1 fluid ounce (fl. oz.) equals 29 milliliters (mL).

Archer®, Demand®, and the Syngenta logo are registered trademarks

of a Syngenta Group Company

Actisol® is a registered trademark of Environmental Delivery Systems,

Inc.

Micro-Injector® is a registered trademark of Whitmire Micro-Gen

Research Laboratories, Inc.

©2004 Syngenta

For non-emergency (e.g. current product information) call

Syngenta Crop Protection at 1-800-334-9481.

Syngenta Crop Protection, Inc.

Greensboro, North Carolina 27409

www.s y ngent a- us . c om

SCP 1066A-L1D 0904